What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 25.06.2025 08:40

[image of Common-mode choke]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Inside Mark Zuckerberg’s AI hiring spree - The Verge
In schematic diagrams this is the symbol for a fuse:
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Why do older siblings always hate younger siblings?
but this device (an Inductor) … impedes the rapid changes in the current.
These devices are installed between the “hot” and “neutral” and protective ground.
For this case there are devices called Metal oxide varistors (MOV).
watchOS 26 Adding a Smaller Yet Useful New Watch Face Setting - MacRumors
Here is a simplified AC power diagram.
The bolt then partially travels down the line to your home.
But… the neutral is now “floating” because of the 1 ohm resistance.
It seems Mohan does not understand the difference between a comment and an Answer.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
There are two important concepts here.
The third is lightning and “how it gets conducted into a home.”
A fuse is a non-resetable over current circuit protector.
Can I study a master’s in travel and tourism in Sweden within a budget of 5 lakhs INR?
First Sentence:
but I think this circuit , shows a few more pieces.
He then describes the function of a fuse.
What are some effective strategies for getting more upvotes on Quora?
It also is a device that limits the change in current flow.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
An AC voltage/ current source, and an ac inductive load.
The MOV will conduct when the voltage exceeds 50% of line voltage.
eight
Scientists identify two global ocean bands heating at record rates - Earth.com
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
One
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Cannabis can pack an unexpected punch for older users, experts warn - OregonLive.com
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Mountaineers Walk Off Kentucky in NCAA Opener - West Virginia University Athletics
But it can get overloaded, and no longer works.
so, what happens?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Did you know that we white women prefer Black boyfriends?
This is 'the assistant's answer'
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
what exactly is a ‘surge’ protector?
A circuit breaker is similar, but is resettable.
Upvotes:
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
[old diagram got deleted by accident]
a photo is worth a thousand words.
At least they know the answer if they wanted it.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
The other is “what does a “fuse” do?”
2024–10–10[John johnson John Johnson ]
2024–10–16 [ OO OLAOYE OYEBODE ]
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What does a fuse do?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This is where the MOV conducts again, and dissipated the energy.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Edit 2024–10.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
These are simplified answers to the original question, and does not change anything I wrote above.
He then describes Rainy Season and Lightning.
I post the exact comment here.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Now when you have a certain ac resistance, then a current flows in a loop.
At one ohm, the resistor has a maximum of 1 watt power.
Because the load is inductive, the current lags the voltage.(by a bit).
(Dc diagram shown, AC is similar).
Barnstars:
nine
There are three different concepts here that are getting confused.
This device then solves the entire problem.
So, the voltage could go up to 500 volts, and the fuse will not open up.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
One is “what exactly is in a ‘surge protector’ ? ”
This one hit behind the barn.
He then asserts :
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
the problem then depends on "how fast does the fuse operate?".
What is lightning?